6mm shim set
A set of 6mm shims is very useful for your bike. The normal requirements for shimming are:
Rear swingarm – a 0.3mm shim each side of the swingarm to prevent it dragging on the chassis plates.
Front pulley – a 0.3mm shim behind the pulley to prevent it dragging on the chassis plate.
Rear axle – 0.2 – 04.mm of shims to take up any float – I normally start at 0.2mm and add more shims if needed.
Front axle – 0.1-0.2mm of shims to take up any float.
We normally use the 3Racing shim sets and you can buy them online from lots of places. I normally use AsiaTees